Wood Lathes? – A Couple of Things to Think About When Buying a Used One

Solid wood lathes come on the used market in a fairly regular fashion and can be a great way to about the wood lathe for the money. However some of the used lathes are lemons. Here are a few ideas for the shopping trip. best lathe

First of all have some idea of what you want to feel with a wood lathe in your shop. Should you be upgrading from your present machine then you have some viewpoints as to what things are needed. The amateur buyer has a harder road to follow. 

You will discover two main ways to choose wood, spindle and faceplate. Spindle turning includes might be found and chair and desk legs and is normal way to general woodworkers to the woodturning world. Making turned legs for a table eventually causes making a table as a reason for turning legs. Faceplate work includes pieces such as game table tops, bowls and vases. A lot of people who take up faceplate work desire to turn bowls and go from there.

Just about all beginner lathes will be well suited for spindles and dishes. Older wood lathes used a system of working above the bed of the lathe for spindles and at the other end of the headstock worked well “offside” for bowls and such. This required faceplates and other materials to have “left handed” strings. In effect, the trouble of setting up for outboard turning meant that most woodturners could not be bothered and satisfied for making the most significant bowl that would fit the lathe bed. Modern-day manufacturers often compromise with a headstock that moves and allows for bigger pieces using the same holding equipment as over the bed.

The problem that arises with this setup comes from lathe speeds. Generally spindles are turned much faster than faceplate work. Large dish blanks, if unbalanced as most are, can at high speeds shake a lathe apart; cause the lathe to walk across the floor; or convert the wood into a projectile. At slow rates none of these take place. Six hundred rpm is merely slow enough for a twelve inch bowl, but slower is better.

Consequently when buying a lathe, get the one which fits your preferred style of turning. Pertaining to spindles a solid collection of ways making up the lathe bed are important. Faceplate lathes should be very strong at the headstock, handle a sizable piece of wood, and have a minimal speed. Bear in mind that a wood lathe is a basic found and look for the finish and quality you would normally desire in a good tool.

Solid wood lathes are a whole lot of fun in the woodworking shop. There are several great bargains on the used market and with a lttle bit of insight, an used lathe is a wonderful way to get started out in the woodturning build.