Fixed-Gear Bike Riding Tips

A single-speed bike with a set drive train is what’s called a fixed-gear bicycle, or a fixie, in short. Its rims are set in movement only as you move its pedals. It’s not capable of coasting, which makes it very much different from your traditional free-wheel bikes. bike riding tips

Whilst it basically a popular choice for a lot of bikers, it appeals generally to those who’d like somewhat more challenge in their training. It shoves your legs to develop more strength and pedaling technique. While you need to pedal whenever, whatever the road or environmental condition is, you only improve in your overall operating ability. But before you hop on one of those vehicles, you should observe some safety and riding suggestions. 

First of all, ensure you wear the proper clothing – that is, a pair of shorts or tight slacks. Injuries can be induced by loose pant hip and legs becoming caught in the chain of the fixed-gear cycle. You should also use toe clips to secure your feet to the pedals. This will help you avoid hitting your legs on pedals that are continually turning with the wheels, which normally happens when going all downhill.

Horizontal dropouts on a bike frame prevent your wheels from coming off your bike in case there is an accidental skid. Ensure you have them in your bicycle frame. These grooves allow you to adapt your chain pressure in a proper manner.

Additionally, it’s best to have brakes on your fixie if you’ll certainly be using it on the highway and not for velodrome racing. Have an entry brake installed on your bike so you can safely stop when you need to.

But since if you’re by using a fixed-gear bike with no brakes and you need to stop, all you can do is to lock the back wheel up. This is done by back pedaling just enough so that the rear wheel will not likely be able to move. Without removing your foot from the pedals and without moving, balance the pressure putting on both front and back throtle. This will help you have a fairly easy restart if you want to move forward again. You have to learn how to do this if you don’t have any tires.

If you’re having a difficult experience to start out moving on again after halting on this type of bike, you might have to reposition your throtle. This is done by lifting your rear tire briefly off the surface and moving the throtle to their starting position.

If you’ve been used to free-wheel bikes, you could be challenged somewhat with this one. But it really does have its advantages more and more people who’d want to train are discovering now. Just be sure that you watch safety guidelines for an enjoyable ride.